Setting the correct angle on your Scraper Plane

plane scraper settings One of the best features of the large scraper plane shown below is the ability to change the angle of the blade for different tasks. At the factory the blade is set so it angles forward about 15 degrees from the vertical position. This results in a smooth cut with short, paper thin shavings. I use this angle for cleaning up machine marks on straight-grained... Read More

Twisted Dovetail Layout Plans – How To.

How To make a Twisted Dovetail Joint! Side – A: Twisted Dovetail - A Side – B: Twisted Dovetail - B Putting the twisted dovetail together: Assembling a Twisted Dovetail Something like this is what you should end up with: Twisted Dovetail Joinery Super simple right? ..just wait till you get started, these plans will come in handy! Also see the Dovetail Inspiration post  Read More

Corner joint options for cabinet doors and other panel type projects.

Mortise & Tenon Joint The basic joint: Rails are grooved their full length for the panel; stiles require a stopped grove. Mortises should be as deep as possible for maximum strength; try at least 1.25” deep. Mortise and Tenon Bridle Joint A strong and easily made joint. You can cut the open mortise and tenon on the tablesaw using a tenoning jig (or just wing it like I do... Read More